Struct esp_idf_sys::i2s_driver_config_t

#[repr(C)]
pub struct i2s_driver_config_t {

    pub mode: i2s_mode_t,
    pub sample_rate: u32,
    pub bits_per_sample: i2s_bits_per_sample_t,
    pub channel_format: i2s_channel_fmt_t,
    pub communication_format: i2s_comm_format_t,
    pub intr_alloc_flags: c_int,
    pub __bindgen_anon_1: i2s_driver_config_t__bindgen_ty_1,
    pub __bindgen_anon_2: i2s_driver_config_t__bindgen_ty_2,
    pub use_apll: bool,
    pub tx_desc_auto_clear: bool,
    pub fixed_mclk: c_int,
    pub mclk_multiple: i2s_mclk_multiple_t,
    pub bits_per_chan: i2s_bits_per_chan_t,
}

@brief I2S driver configuration parameters

Fields

mode: i2s_mode_t

< I2S work mode

sample_rate: u32

< I2S sample rate

bits_per_sample: i2s_bits_per_sample_t

< I2S sample bits in one channel

channel_format: i2s_channel_fmt_t

< I2S channel format.

communication_format: i2s_comm_format_t

< I2S communication format

intr_alloc_flags: c_int

< Flags used to allocate the interrupt. One or multiple (ORred) ESP_INTR_FLAG_* values. See esp_intr_alloc.h for more info

__bindgen_anon_1: i2s_driver_config_t__bindgen_ty_1

__bindgen_anon_2: i2s_driver_config_t__bindgen_ty_2

use_apll: bool

< I2S using APLL as main I2S clock, enable it to get accurate clock

tx_desc_auto_clear: bool

< I2S auto clear tx descriptor if there is underflow condition (helps in avoiding noise in case of data unavailability)

fixed_mclk: c_int

< I2S using fixed MCLK output. If use_apll = true and fixed_mclk > 0, then the clock output for i2s is fixed and equal to the fixed_mclk value. If fixed_mclk set, mclk_multiple won’t take effect

mclk_multiple: i2s_mclk_multiple_t

< The multiple of I2S master clock(MCLK) to sample rate

bits_per_chan: i2s_bits_per_chan_t

< I2S total bits in one channel， only take effect when larger than ‘bits_per_sample’, default ‘0’ means equal to ‘bits_per_sample’

Trait Implementations

impl Clone for i2s_driver_config_t

fn clone(&self) -> i2s_driver_config_t

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for i2s_driver_config_t

fn default() -> Self

Returns the “default value” for a type.

impl Copy for i2s_driver_config_t